Message 1
From: Gayle Wohlken
Date: Wed, 15 Apr 2009 14:15:37 GMT
Subject: [Baren 38645] "Dandelions and Grass"
Send Message: To this poster
Message 2
From: Diana Moll
Date: Wed, 15 Apr 2009 14:38:20 GMT
Subject: [Baren 38646] Re: "Dandelions and Grass"
Send Message: To this poster
Message 3
From: Barbara Mason
Date: Wed, 15 Apr 2009 14:51:40 GMT
Subject: [Baren 38647] Re: "Dandelions and Grass"
Send Message: To this poster
Message 4
From: Diane Cutter
Date: Wed, 15 Apr 2009 14:56:36 GMT
Subject: [Baren 38648] Re: "Dandelions and Grass"
Send Message: To this poster
Message 5
From: "Louise Cass"
Date: Wed, 15 Apr 2009 14:59:22 GMT
Subject: [Baren 38649] Re: Online print collection ...
Send Message: To this poster
Message 6
From: slinders # comcast.net
Date: Wed, 15 Apr 2009 15:23:19 GMT
Subject: [Baren 38650] Re: "Dandelions and Grass"
Send Message: To this poster
Message 7
From: ArtfulCarol # aol.com
Date: Wed, 15 Apr 2009 17:52:01 GMT
Subject: [Baren 38651] Re: "Dandelions and Grass"
Send Message: To this poster
Message 8
From: Gayle Wohlken
Date: Wed, 15 Apr 2009 18:10:15 GMT
Subject: [Baren 38652] "Dandelions and Grass"
Send Message: To this poster
Digest Appendix
Postings made on [Baren] members' blogs
over the past 24 hours ...
Subject: Fleshing Out Dorothy May
Posted by: Annie B
I want to give Dorothy May some substance, make her look real, so I added a couple of layers to her form today. More to come. Sometimes I use blank areas from old blocks when I can find them. The second impression I did this afternoon was carved on my old zero and one block from the Great Wall print: [Long item has been trimmed at this point. The full blog entry can be viewed here] |
This item is taken from the blog Woodblock Dreams.
'Reply' to Baren about this item.
Subject: As the Emperor Turns
Posted by: Phare-Camp
Almost finished editioning the emperor. Glad I broke off on the last steps when I did, I find that i'm getting too dense of cut marks on the keyline (black) block. I'm going to need to wipe the plate in some areas before I print it. I like to incorporate cut marks and I like the marks on the slightly lighter plates, I may cut some of the cut marks out or just wipe lightly so that I get blendy cut cut marks. I will also need to go into some of the cards after they dry and lightly brush in some yellow on the turtle. My press kept loosening on one side, the side closest to me so it was easy to readjust, but the gauge didn't move so I couldn't tell the pressure was too light on the turtle side until I pulled the print. When the pressure is adjusted just right there is a very slight resistance when it hits the beginning edge of the plate and it gives a very slight jump when the roller goes of the edge of the plate. This will still happen if one . . . [Long item has been trimmed at this point. The full blog entry can be viewed here] |
This item is taken from the blog Phare-Camp Art Journal.
'Reply' to Baren about this item.