Baren Digest Saturday, 1 February 2003 Volume 22 : Number 2114 ---------------------------------------------------------------------- From: "Jeanne N. Chase" Date: Fri, 31 Jan 2003 10:51:04 -0500 Subject: [Baren 20586] Re: messy hanga, etc Sarah As you said "Hanga is difficult". I finally gave up on mine and although I sent in my hanga print for # 15 it was really Sandbox 101 and I apologize for the poorly done print, so it is back to oils for me. Anyway, I did get a huge appreciation for all of you who do Hanga printing. Jeanne N. ------------------------------ From: "Elizabeth B. Atwood" Date: Fri, 31 Jan 2003 11:05:43 -0500 Subject: [Baren 20587] Ink cleanup To Gayle and others using the oily inks: Get a tube of Avon's Silicone Glove. Work the cream well into your hands and around your finger nails and cuticles. You can then wash up after a printing session leaving not a trace of ink on your hands. To print wearing gloves is a terrible idea. Of course, we always said that you could tell a true working artist by the many left over colors on her/his hands. But who among us needs that proof? ElizA ------------------------------ From: "Maria Diener (aka Arango)" Date: Fri, 31 Jan 2003 08:17:04 -0800 Subject: [Baren 20588] proofing puzzle block Okay I succumb to peer pressure from the proof-bugs! The reasoning for not proofing the block is that I want clean lines in the final block. The block itself will be a thing of beauty and if we have some little blocks with pristine lines and some little blocks with stained lines, that just won't do! I plan on making the final block into a nice display piece; maybe we can pass it around like the Stanley Cup. SO! You may proof your block IF you follow these directions: - - Proof only with oil based ink - - DO NOT SCRUB the block, do not use oil or solvent to clean the ink off--Clean block by printing successively on newsprint or newspaper until all the ink residue is gone There! happy? :-) Maria Still waiting to hear from Agda Synnergren, Brenda Everett, and Monica Bright regarding receipt of their block. I will wait three/four more weeks and then will take substitutes. If anyone is interested in being an alternate for the puzzle project, please contact me offlist. I really really REALLY don't want to cut substitute blocks unless absolutely necessary. Colleen I will get you another block at the end of February if that customs guy is still holding on to 'our' block. Info page: http://www.1000woodcuts.com/puzzle/project.html <||><||><||><||><||><||> Maria Arango Las Vegas Nevada USA www.1000woodcuts.com <||><||><||><||><||><||> ------------------------------ From: Shireen Holman Date: Fri, 31 Jan 2003 14:53:35 -0500 Subject: [Baren 20589] Re: proofing puzzle block So Maria, If you want more-or-less pristine blocks, what about coating the block first so that we can see the lines as we carve? Will that ruin the final display? Shireen At 08:17 AM 1/31/2003 -0800, you wrote: >Okay I succumb to peer pressure from the proof-bugs! > >The reasoning for not proofing the block is that I want clean lines in the >final block. The block itself will be a thing of beauty and if we have some >little blocks with pristine lines and some little blocks with stained lines, >that just won't do! I plan on making the final block into a nice display >piece; maybe we can pass it around like the Stanley Cup. >SO! >You may proof your block IF you follow these directions: >- Proof only with oil based ink >- DO NOT SCRUB the block, do not use oil or solvent to clean the ink >off--Clean block by printing successively on newsprint or newspaper until >all the ink residue is gone *********************************************** Shireen Holman, Printmaker and Book Artist email: shireenh#earthlink.net http://www.shireenholman.com *********************************************** ------------------------------ From: "Maria Diener (aka Arango)" Date: Fri, 31 Jan 2003 12:02:34 -0800 Subject: [Baren 20590] Re: proofing puzzle block > So Maria, > If you want more-or-less pristine blocks, what about coating the block > first so that we can see the lines as we carve? Will that ruin the final > display? > Shireen No problem with staining the whole block before you carve. You can also apply your favorite oil (mineral, vegetable, linseed, cooking, martian...) prior to carving to make carving easier. I find that last step absolutely necessary here in the desert. I will roll up the block and let it dry, so whatever you use to tint the block will be covered by black ink. Happy carving, Maria PS Will be in Scottsdale next weekend (Feb 7,8,9) for the 5th Avenue Festival. Coincidentally, the festival is on 5th Avenue in Scottsdale :-) Arizonians always welcomed to drop by and find me amongst the hangie thinguies and frilly stuff. Actually, much fine art to see at this one, it's a good'un. <||><||><||><||><||><||> Maria Arango Las Vegas Nevada USA www.1000woodcuts.com <||><||><||><||><||><||> ------------------------------ From: Roger Leee Date: Fri, 31 Jan 2003 12:13:56 -0800 Subject: [Baren 20591] Re: Ink cleanup Hello I was given information from a friend who is an Intaglio printmaker. It was so startling I am still amazed by it. I use VEGETABLE OIL to clean up ink from plates, rollers and my hands. I keep a squeeze bottle near the ink area and do not have to think about the toxic part of the process. No runny mess, fumes, need for gloves. Just squeeze what is needed and it will dissolve any ink. Clean up with rags or paper towels. IT WORKS!! I also use a product called "pr 88". This is a barrier cream that was started for the automobile business. It goes on very easy - does not penetrate the skin - and washes off in water. This stuff is the best barrier cream I have found. I have tried many. It is a bit expensive, but worth it. About $25 (cdn) for a litre ( 33 OZ, for those south of the border.) - but goes a long way You can work on a very inky, dirty project and keep your hands clean. As long as you do not work with water, this will stay in place. Any cleaning solvents will not penetrate to the skin. Try them both Roger Lee leesartstuff#shaw.ca Vernon, BC - ----- Original Message ----- From: "Elizabeth B. Atwood" To: "BarenBoard" Sent: Friday, January 31, 2003 8:05 AM Subject: [Baren 20587] Ink cleanup > To Gayle and others using the oily inks: Get a tube of Avon's Silicone > Glove. Work the cream well into your hands and around your finger nails and > cuticles. You can then wash up after a printing session leaving not a trace > of ink on your hands. To print wearing gloves is a terrible idea. > Of course, we always said that you could tell a true working artist by the > many left over colors on her/his hands. But who among us needs that proof? > ElizA > > ------------------------------ From: Dan Dew Date: Fri, 31 Jan 2003 18:34:38 -0500 Subject: [Baren 20592] A question of ethics? I have a question, or dilemma, depending on your point of view, that I would like to humbly ask the group: Is a single state of a reduction block print acceptable as a separate edition on its own? Let me elaborate. As many of you know (for those who don't go look at http://www.dandew.com ) most of my prints are reduction blocks. If, by the time I get to the third or fourth color, I have an awesome looking block (i.e. I could print it at this point in a single color and it would look good) I consider myself well on the way of creating a good, multi colored print. So, I want to print an edition of, say the fourth color of the reduction as a series of its own. I usually state in the title that this is "stage 4" of another series. Is that O.K.? I hope this makes sense, I wish I was more adept at explaining things like our Maria, but alas, I am bald and confusing at times. Here's an example of what I mean: This is color stage number #5, as a B/W print: http://groups.yahoo.com/group/PrintAustralia/files/DanDew/SacredTreestage5.j pg Here the final version in full bloom: http://www.dandew.com/proverbs3_18.htm Daniel L. Dew Tampa, FL ------------------------------ From: Myron Turner Date: Fri, 31 Jan 2003 18:15:58 -0600 Subject: [Baren 20593] Re: A question of ethics? Your color stage #5 is only available to Yahoo group members. Myron At 06:34 PM 31/01/2003 -0500, you wrote: >Here's an example of what I mean: >This is color stage number #5, as a B/W print: >http://groups.yahoo.com/group/PrintAustralia/files/DanDew/SacredTreestage5.j >pg >Daniel L. Dew >Tampa, FL ------------------------------ From: Charles Morgan Date: Fri, 31 Jan 2003 16:18:19 -0800 Subject: [Baren 20594] Re: A question of ethics? And not even to us!!! I tried to look at it, but Yahoo says the image is not available. Cheers ... Charles At 06:15 PM 1/31/03 -0600, you wrote: >Your color stage #5 is only available to Yahoo group members. > >Myron > >At 06:34 PM 31/01/2003 -0500, you wrote: >>Here's an example of what I mean: >>This is color stage number #5, as a B/W print: >>http://groups.yahoo.com/group/PrintAustralia/files/DanDew/SacredTreestage5.j >>pg >>Daniel L. Dew >>Tampa, FL ------------------------------ From: Roger Leee Date: Fri, 31 Jan 2003 21:59:47 -0800 Subject: [Baren 20595] Re: A question of ethics? I would think that a print of a single state of a reduction print could most certainly be a "print" on its own. It is at least a " variation". No different from a triptych type of Intaglio where the strips that make up a print can be re-arranged into different patterns or images - using the same plates. Roger Lee leesartstuff#sahw.ca Vernon, BC Canada - ----- Original Message ----- From: "Dan Dew" To: Sent: Friday, January 31, 2003 3:34 PM Subject: [Baren 20592] A question of ethics? > Is a single state of a reduction block print acceptable as a separate > edition on its own? ------------------------------ From: "Jean Eger Womack" Date: Fri, 31 Jan 2003 22:40:06 -0800 Subject: [Baren 20596] Re: Baren Digest V22 #2113 Is it the Akua Intaglio that one can roll on to a woodblock instead of Speedball? How are the blending properties of that ink? see http://www.waterbasedinks.com Jean Womack ------------------------------ From: John and Jan Telfer Date: Sat, 1 Feb 03 17:54:30 +0800 Subject: [Baren 20598] Re:Welcome Ignasi Dear Ignasi, >Ignasi >Madrid (Spain) Yes, many of us have the same feeling in welcoming you to Baren even though we can't all reply because there would be too many "me toos", but we do welcome new members. You have a lovely country and so inspirational for artists and architects. I was there during the Barcelona Olympic Games and loved it and all my family have been back since. Welcome. Jan ------------------------------ End of Baren Digest V22 #2114 *****************************